{"product_id":"phase2-pht-6100-ultrasonic-hardness-tester-w-1kg-probe-motorized","title":"Phase2+ PHT-6100 Ultrasonic Hardness Tester w\/ 1kg Probe (motorized)","description":"\u003ch2\u003ePhase2+ PHT-6100 Ultrasonic Hardness Tester w\/ 1kg Probe (motorized)\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe Phase2+ PHT-6100 is the most advanced portable hardness testing instrument in the Phase II lineup, combining two fundamentally different and industry-accepted hardness testing methods, Ultrasonic Contact Impedance (UCI) and Leeb Dynamic Impact into a single handheld device. This non-destructive handheld portable hardness tester merges UCI and Leeb portable hardness testing in one state-of-the-art device, enabling operators to address a far wider range of materials, part geometries, and testing requirements than either method alone could cover.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe PHT-6100 with its 1.00 kgf motorized probe is specifically designed for checking machined surfaces, with the motor-driven probe applying a precisely controlled and consistent load that eliminates the variability introduced by manual probe operation. The UCI method works by depressing a 136-degree diamond at the end of a vibrating rod into the test surface at a fixed load, calculating the difference in ultrasonic vibration frequency into a hardness value. Unlike dynamic impact testers, UCI hardness testers are not restricted to large mass items and can test metals as thin as 2 mm at hardness values as low as 20 HRC (75 HB). This makes the PHT-6100 particularly suited to thin-section components, case-hardened parts, coatings, and precision machined workpieces that cannot be reliably measured with a standard Leeb instrument.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe PHT-6100 covers a hardness range of HRC 20–70, HRB 55–100, HB 100–739, and HV 100–2970, with scale selection including Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers, Leeb, and additional UCI-only scales including superficial Rockwell (HRN15, HRN30, HRN45, HRT15, HRT30, HRT45), HRF, Knoop (HK), and Shore (HD). Tolerance is +\/- 3.0% deviation of average from the reference value of the test block with a minimum of 5 tests, and the instrument features a color LCD display with adjustable backlight brightness and multilingual interface selection. Battery life is approximately 6 hours without backlight, with a recharging time of approximately 8 hours.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Method Testing in One Instrument (UCI and Leeb)\u003c\/strong\u003e - The PHT-6100 is the only Phase II portable tester that integrates both Ultrasonic Contact Impedance and Leeb Dynamic Impact testing methods, giving operators the ability to address thin sections, coatings, and precision parts (UCI) as well as large, heavy metal components (Leeb) from a single instrument.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1kgf Motorized Probe for Machined Surfaces\u003c\/strong\u003e - The motorized probe delivers a precisely controlled and repeatable 1 kgf loading force to the test surface, eliminating the force variation inherent in manual probe operation and ensuring consistent, reliable results on machined parts and similar finished surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-Destructive Testing on Thin and Precision Parts\u003c\/strong\u003e - The UCI method allows non-destructive hardness testing on workpieces as thin as 2 mm and as soft as 20 HRC (75 HB), making the PHT-6100 suitable for thin-walled components, case-hardened parts, finished surfaces, and parts that cannot sustain the impact load of a Leeb-only tester.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidest Hardness Scale Coverage in the Series\u003c\/strong\u003e - In addition to Rockwell C, Rockwell B, Rockwell A, Brinell, Vickers, and Leeb, the UCI mode provides access to superficial Rockwell scales (HRN15, HRN30, HRN45, HRT15, HRT30, HRT45), HRF, Knoop (HK), and Shore (HD) - the broadest scale selection available in the Phase II portable lineup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge Memory with USB Output and Color Display\u003c\/strong\u003e - On-board data memory stores 2000 groups of measured data and 20 groups of calibration data, with USB cable output for PC download, all presented on a color LCD screen with adjustable backlight and multilingual interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRechargeable Lithium Battery with Auto Power Off\u003c\/strong\u003e - Powered by a 4.2V \/ 4800 mAh rechargeable lithium battery providing approximately 6 hours of use without backlight, with auto power-off after 5 minutes of inactivity to conserve charge between tests.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\" cellspacing=\"0\" cellpadding=\"0\" dir=\"ltr\" border=\"1\" data-sheets-root=\"1\" data-sheets-baot=\"1\"\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"183\"\u003e\n\u003ccol width=\"312\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel Number\u003c\/td\u003e\n\u003ctd\u003ePHT-6100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003ePhase2+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTester Type\u003c\/td\u003e\n\u003ctd\u003eUCI (Ultrasonic Contact Impedance) and Leeb Dynamic Impact - combined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Type\u003c\/td\u003e\n\u003ctd\u003e1kgf motorized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eMachined surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUCI Diamond Geometry\u003c\/td\u003e\n\u003ctd\u003e136-degree Vickers diamond\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUCI Loading Force\u003c\/td\u003e\n\u003ctd\u003e1 kgf (10 N) - motorized, automatically applied\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness Range (UCI)\u003c\/td\u003e\n\u003ctd\u003eHRC: 20–70 \/ HRB: 55–100 \/ HB: 100–739 \/ HV: 100–2970\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness Scales (UCI)\u003c\/td\u003e\n\u003ctd\u003eHRC, HRB, HRA, HB, HV, HRN15\/30\/45, HRT15\/30\/45, HRF, HK (Knoop), HD (Shore)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness Scales (Leeb)\u003c\/td\u003e\n\u003ctd\u003eHLD, plus conversion to HRC, HRB, HB, HV, HS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTolerance\u003c\/td\u003e\n\u003ctd\u003e+\/- 3.0% deviation of average from reference value (min. 5 tests)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Sample Thickness\u003c\/td\u003e\n\u003ctd\u003e2 mm (0.08 in.) for steel; other materials vary by hardness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin. Sample Weight\u003c\/td\u003e\n\u003ctd\u003e0.3 kg (0.66 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eColor LCD with adjustable backlight brightness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLanguage Options\u003c\/td\u003e\n\u003ctd\u003eEnglish, German, Chinese, Spanish, and more\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData Memory\u003c\/td\u003e\n\u003ctd\u003e2000 groups of measured data; 20 groups of calibration data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eData Output\u003c\/td\u003e\n\u003ctd\u003eUSB cable (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003eRechargeable lithium battery — 4.2V, 4800 mAh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBattery Life\u003c\/td\u003e\n\u003ctd\u003eApprox. 6 hours (without backlight)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecharge Time\u003c\/td\u003e\n\u003ctd\u003eApprox. 8 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAuto Power Off\u003c\/td\u003e\n\u003ctd\u003eAfter 5 minutes of inactivity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard Compliance\u003c\/td\u003e\n\u003ctd\u003eConforms to relevant ASTM standards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable Leeb Impact Devices (optional)\u003c\/td\u003e\n\u003ctd\u003eD, DC, D+15, G, DL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eItems Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePHT-6100 UCI \/ Leeb Portable Hardness Tester\u003c\/li\u003e\n\u003cli\u003e1kgf motorized UCI probe\u003c\/li\u003e\n\u003cli\u003eUSB output cable\u003c\/li\u003e\n\u003cli\u003eHardness test block set (HRC 20s, HRC 40s, HRC 60s)\u003c\/li\u003e\n\u003cli\u003eRechargeable lithium battery (installed)\u003c\/li\u003e\n\u003cli\u003eBattery charger\u003c\/li\u003e\n\u003cli\u003eCustom carry case\u003c\/li\u003e\n\u003cli\u003eOperation manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0890\/6991\/2348\/files\/Phase2_PHT-6000_Series_Ultrasonic_Hardness_Tester_User_Manual.pdf?v=1773749665\" title=\"Phase2+ PHT-6100 Ultrasonic Hardness Tester User Manual\"\u003e\u003cimg alt=\"INSIZE ISHW-L20B Webster Hardness Tester Manual\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0890\/6991\/2348\/files\/PDF_image_100x100.png?v=1756409173\"\u003ePhase2+ PHT-6100 Ultrasonic Hardness Tester User Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0890\/6991\/2348\/files\/Phase2_PHT-6000_Series_Ultrasonic_Hardness_Tester_Catalog.pdf?v=1773749698\" title=\"Phase2+ PHT-6100 Ultrasonic Hardness Tester Catalog\"\u003e\u003cimg alt=\"INSIZE ISHW-L20B Webster Hardness Tester Manual\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0890\/6991\/2348\/files\/PDF_image_100x100.png?v=1756409173\"\u003ePhase2+ PHT-6100 Ultrasonic Hardness Tester Catalog\u003c\/a\u003e\u003c\/p\u003e","brand":"Phase2+","offers":[{"title":"Default Title","offer_id":53858731295004,"sku":"PHT-6100","price":9822.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6991\/2348\/files\/Phase2_PHT-6100_Ultrasonic_Hardness_Tester_w_1kg_Probe_motorized.png?v=1773749981","url":"https:\/\/precisionengineeringsupply.com\/products\/phase2-pht-6100-ultrasonic-hardness-tester-w-1kg-probe-motorized","provider":"Precision Engineering Supply","version":"1.0","type":"link"}