{"product_id":"phase2-pht6000-accessory-probes","title":"Phase2+ PHT6000 Accessory Probes","description":"\u003ch2 class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003ePhase2+ PHT6000 Accessory Probes\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe Phase2+ PHT-6000 Series UCI Probes are genuine replacement and expansion probes for the full PHT-6000 Series of portable Ultrasonic Contact Impedance hardness testers, including the PHT-6030, PHT-6080, PHT-6100, PHT-6001, PHT-6002, PHT-6005, PHT-6010, and PHT-6011. Available in eight configurations across two families motorized and manual these probes allow users to replace worn or damaged probes, add a second load configuration to an existing instrument, or expand a single PHT-6000 base unit's testing range without purchasing an entirely new tester.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eAll eight probes operate on the Ultrasonic Contact Impedance (UCI) measurement principle: a 136-degree diamond tip at the end of a vibrating rod is pressed into the test surface at a fixed load, and the resulting shift in ultrasonic vibration frequency is converted into a hardness value. Because the UCI method is non-destructive and operates independently of part mass, these probes can test metals as thin as 2mm (0.08\") — a capability that dynamic impact methods cannot match. The key selection variable across all eight probes is loading force, which directly determines the surface roughness tolerance of each probe. Lower loads produce shallower indentations suited to fine finished surfaces; higher loads produce deeper penetrations that can resolve a hardness reading on coarser, rougher, or as-machined surfaces.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe three motorized probes (PHT6000-221, PHT6000-241, PHT6000-251) use an automated loading mechanism that eliminates operator-applied force variability, making them the preferred choice for applications where surface finish is critical or where measurement consistency across multiple operators must be controlled. The 0.3 kgf motorized probe (PHT6000-221) is designed for coating layer hardness verification and thin finished parts; the 0.8 kgf (PHT6000-241) is optimized for smooth bearing-type surfaces; the 1 kgf (PHT6000-251) covers machined and highly polished surfaces. The five manual probes (PHT6000-310 through PHT6000-400) require the operator to apply and release the test load by hand, offering a cost-effective solution for less finish-critical applications and providing a wider surface roughness operating range — from Ra \u0026lt; 3.2 μm for the 1 kgf probe up to Ra \u0026lt; 15 μm for the 10 kgf probe. The extended-length LONG 1 kgf probe (PHT6000-330), at 213mm versus the standard 154mm, reaches into deep grooves, recesses, and confined geometries that the standard-length probes cannot access.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eAll probes connect to PHT-6000 Series base instruments via the standard probe interface. No firmware updates or additional hardware are required for probe changes between compatible configurations.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli class=\"whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eEight Load Configurations - One Selection Framework\u003c\/strong\u003e - Three motorized probes (0.3, 0.8, and 1 kgf) and five manual probes (1, 2, 5, and 10 kgf standard; 1 kgf extended-length) cover the full range of PHT-6000 Series UCI testing applications, from thin coatings and mirror-finish surfaces at the low end to as-machined and rough industrial surfaces at the high end with load selection directly determining usable surface roughness tolerance.\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eMotorized Probes Eliminate Operator Force Variability\u003c\/strong\u003e - The PHT6000-221, PHT6000-241, and PHT6000-251 use automated load application to remove human force inconsistency from the measurement, delivering the highest levels of repeatability for finish-critical surfaces, production line inspection, or multi-operator environments where measurement system consistency is a quality requirement.\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eNon-Destructive UCI Testing on Parts as Thin as 2mm\u003c\/strong\u003e - All eight probes operate on the Ultrasonic Contact Impedance principle, enabling hardness measurement on steel and other metals as thin as 2mm (0.08\") and as soft as 20 HRC (75 HB) - applications where dynamic Leeb impact testing is not viable due to insufficient part mass or thickness constraints.\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eExtended-Length Manual Probe for Deep Groove and Confined Access\u003c\/strong\u003e - The PHT6000-330 LONG 1 kgf manual probe, at 213mm in length versus the standard 154mm, extends UCI testing capability into deep grooves, narrow bores, recessed cavities, and other confined geometries where standard-length probes cannot reach the test surface without requiring a probe stand or custom fixturing.\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eDrop-In Replacement for All PHT-6000 Series Instruments\u003c\/strong\u003e - All probes are fully compatible with every PHT-6000 Series base unit and require no calibration adjustments, software updates, or additional hardware for installation; they serve as direct replacements for probes that shipped with PHT-6001, PHT-6002, PHT-6005, PHT-6010, PHT-6011, PHT-6030, PHT-6080, and PHT-6100 testers, as well as expansion probes for base units adding a second load configuration.\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words pl-2\"\u003e\n\u003cstrong\u003eGenuine Phase2+ Parts\u003c\/strong\u003e - These are genuine Phase2+ replacement and expansion probes, not third-party alternatives, ensuring full compatibility with PHT-6000 Series instruments, consistent diamond tip geometry, and the manufacturing tolerances required to maintain the ±3.0% accuracy specification of the PHT-6000 platform.\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\" cellspacing=\"0\" cellpadding=\"0\" dir=\"ltr\" border=\"1\" data-sheets-root=\"1\" data-sheets-baot=\"1\"\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"290\"\u003e\n\u003ccol width=\"385\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"1\" colspan=\"2\"\u003eProbe Selection Guide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eRecommended Probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCoating layer hardness; thin finished parts\u003c\/td\u003e\n\u003ctd\u003ePHT6000-221 (0.3 kgf Motorized)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmooth bearing-type surfaces\u003c\/td\u003e\n\u003ctd\u003ePHT6000-241 (0.8 kgf Motorized)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachined or highly polished surfaces\u003c\/td\u003e\n\u003ctd\u003ePHT6000-251 (1 kgf Motorized) or PHT6000-310 (1 kgf Manual)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGeneral-purpose fine-finish surfaces\u003c\/td\u003e\n\u003ctd\u003ePHT6000-320 (2 kgf Manual)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeep grooves, recesses, confined geometry\u003c\/td\u003e\n\u003ctd\u003ePHT6000-330 (LONG 1 kgf Manual)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAs-machined or moderately rough surfaces\u003c\/td\u003e\n\u003ctd\u003ePHT6000-350 (5 kgf Manual)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRough surfaces, castings, heavy industrial parts\u003c\/td\u003e\n\u003ctd\u003ePHT6000-400 (10 kgf Manual)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ctable xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\" cellspacing=\"0\" cellpadding=\"0\" dir=\"ltr\" border=\"1\" data-sheets-root=\"1\" data-sheets-baot=\"1\"\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"154\"\u003e\n\u003ccol width=\"256\"\u003e\n\u003ccol width=\"185\"\u003e\n\u003ccol width=\"218\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"1\" colspan=\"4\"\u003eMotorized UCI Probes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecification\u003c\/td\u003e\n\u003ctd\u003ePHT6000-221\u003c\/td\u003e\n\u003ctd\u003ePHT6000-241\u003c\/td\u003e\n\u003ctd\u003ePHT6000-251\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoading Force\u003c\/td\u003e\n\u003ctd\u003e0.3 kgf (3N)\u003c\/td\u003e\n\u003ctd\u003e0.8 kgf (8N)\u003c\/td\u003e\n\u003ctd\u003e1 kgf (10N)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eCoating layer hardness; thin finished parts\u003c\/td\u003e\n\u003ctd\u003eSmooth bearing-type surfaces\u003c\/td\u003e\n\u003ctd\u003eMachined \/ highly polished surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Diameter\u003c\/td\u003e\n\u003ctd\u003e46 mm\u003c\/td\u003e\n\u003ctd\u003e46 mm\u003c\/td\u003e\n\u003ctd\u003e46 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Length\u003c\/td\u003e\n\u003ctd\u003e198 mm\u003c\/td\u003e\n\u003ctd\u003e198 mm\u003c\/td\u003e\n\u003ctd\u003e198 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOscillating Rod Diameter\u003c\/td\u003e\n\u003ctd\u003e3.7 mm\u003c\/td\u003e\n\u003ctd\u003e3.7 mm\u003c\/td\u003e\n\u003ctd\u003e3.7 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Surface Roughness\u003c\/td\u003e\n\u003ctd\u003eRa \u0026lt; 3.2 μm (Ra \u0026lt; 125 μin)\u003c\/td\u003e\n\u003ctd\u003eRa \u0026lt; 5 μm (Ra \u0026lt; 197 μin)\u003c\/td\u003e\n\u003ctd\u003eRa \u0026lt; 8 μm (Ra \u0026lt; 314 μin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin Sample Weight\u003c\/td\u003e\n\u003ctd\u003e0.3 kg (0.66 lbs)\u003c\/td\u003e\n\u003ctd\u003e0.3 kg (0.66 lbs)\u003c\/td\u003e\n\u003ctd\u003e0.3 kg (0.66 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin Sample Thickness\u003c\/td\u003e\n\u003ctd\u003e2 mm (0.08\")\u003c\/td\u003e\n\u003ctd\u003e2 mm (0.08\")\u003c\/td\u003e\n\u003ctd\u003e2 mm (0.08\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad Application\u003c\/td\u003e\n\u003ctd\u003eMotorized (automated)\u003c\/td\u003e\n\u003ctd\u003eMotorized (automated)\u003c\/td\u003e\n\u003ctd\u003eMotorized (automated)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Instruments\u003c\/td\u003e\n\u003ctd\u003eAll PHT-6000 Series\u003c\/td\u003e\n\u003ctd\u003eAll PHT-6000 Series\u003c\/td\u003e\n\u003ctd\u003eAll PHT-6000 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReplaces Probe From\u003c\/td\u003e\n\u003ctd\u003ePHT-6030\u003c\/td\u003e\n\u003ctd\u003ePHT-6080\u003c\/td\u003e\n\u003ctd\u003ePHT-6100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ctable xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\" cellspacing=\"0\" cellpadding=\"0\" dir=\"ltr\" border=\"1\" data-sheets-root=\"1\" data-sheets-baot=\"1\"\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"154\"\u003e\n\u003ccol width=\"169\"\u003e\n\u003ccol width=\"158\"\u003e\n\u003ccol width=\"169\"\u003e\n\u003ccol width=\"165\"\u003e\n\u003ccol width=\"165\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"1\" colspan=\"6\"\u003eManual UCI Probes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpecification\u003c\/td\u003e\n\u003ctd\u003ePHT6000-310\u003c\/td\u003e\n\u003ctd\u003ePHT6000-320\u003c\/td\u003e\n\u003ctd\u003ePHT6000-330\u003c\/td\u003e\n\u003ctd\u003ePHT6000-350\u003c\/td\u003e\n\u003ctd\u003ePHT6000-400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoading Force\u003c\/td\u003e\n\u003ctd\u003e1 kgf (10N)\u003c\/td\u003e\n\u003ctd\u003e2 kgf (20N)\u003c\/td\u003e\n\u003ctd\u003e1 kgf (10N)\u003c\/td\u003e\n\u003ctd\u003e5 kgf (50N)\u003c\/td\u003e\n\u003ctd\u003e10 kgf (98N)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eSmooth surfaces\u003c\/td\u003e\n\u003ctd\u003eFine-finish surfaces\u003c\/td\u003e\n\u003ctd\u003eDeep grooves \/ recesses\u003c\/td\u003e\n\u003ctd\u003eMachined \/ rough surfaces\u003c\/td\u003e\n\u003ctd\u003eRough industrial surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Diameter\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003ctd\u003e22 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Length\u003c\/td\u003e\n\u003ctd\u003e154 mm\u003c\/td\u003e\n\u003ctd\u003e154 mm\u003c\/td\u003e\n\u003ctd\u003e213 mm\u003c\/td\u003e\n\u003ctd\u003e154 mm\u003c\/td\u003e\n\u003ctd\u003e154 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOscillating Rod Diameter\u003c\/td\u003e\n\u003ctd\u003e2.4 mm\u003c\/td\u003e\n\u003ctd\u003e2.4 mm\u003c\/td\u003e\n\u003ctd\u003e2.4 mm\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Surface Roughness\u003c\/td\u003e\n\u003ctd\u003eRa \u0026lt; 3.2 μm (Ra \u0026lt; 125 μin)\u003c\/td\u003e\n\u003ctd\u003eRa \u0026lt; 5 μm (Ra \u0026lt; 197 μin)\u003c\/td\u003e\n\u003ctd\u003eRa \u0026lt; 3.2 μm (Ra \u0026lt; 125 μin)\u003c\/td\u003e\n\u003ctd\u003eRa \u0026lt; 10 μm (Ra \u0026lt; 393 μin)\u003c\/td\u003e\n\u003ctd\u003eRa \u0026lt; 15 μm (Ra \u0026lt; 590 μin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin Sample Weight\u003c\/td\u003e\n\u003ctd\u003e0.3 kg (0.66 lbs)\u003c\/td\u003e\n\u003ctd\u003e0.3 kg (0.66 lbs)\u003c\/td\u003e\n\u003ctd\u003e0.3 kg (0.66 lbs)\u003c\/td\u003e\n\u003ctd\u003e0.3 kg (0.66 lbs)\u003c\/td\u003e\n\u003ctd\u003e0.3 kg (0.66 lbs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMin Sample Thickness\u003c\/td\u003e\n\u003ctd\u003e2 mm (0.08\")\u003c\/td\u003e\n\u003ctd\u003e2 mm (0.08\")\u003c\/td\u003e\n\u003ctd\u003e2 mm (0.08\")\u003c\/td\u003e\n\u003ctd\u003e2 mm (0.08\")\u003c\/td\u003e\n\u003ctd\u003e2 mm (0.08\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLoad Application\u003c\/td\u003e\n\u003ctd\u003eManual\u003c\/td\u003e\n\u003ctd\u003eManual\u003c\/td\u003e\n\u003ctd\u003eManual\u003c\/td\u003e\n\u003ctd\u003eManual\u003c\/td\u003e\n\u003ctd\u003eManual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Instruments\u003c\/td\u003e\n\u003ctd\u003eAll PHT-6000 Series\u003c\/td\u003e\n\u003ctd\u003eAll PHT-6000 Series\u003c\/td\u003e\n\u003ctd\u003eAll PHT-6000 Series\u003c\/td\u003e\n\u003ctd\u003eAll PHT-6000 Series\u003c\/td\u003e\n\u003ctd\u003eAll PHT-6000 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReplaces Probe From\u003c\/td\u003e\n\u003ctd\u003ePHT-6001\u003c\/td\u003e\n\u003ctd\u003ePHT-6002\u003c\/td\u003e\n\u003ctd\u003ePHT-6011\u003c\/td\u003e\n\u003ctd\u003ePHT-6005\u003c\/td\u003e\n\u003ctd\u003ePHT-6010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ctable xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\" cellspacing=\"0\" cellpadding=\"0\" dir=\"ltr\" border=\"1\" data-sheets-root=\"1\" data-sheets-baot=\"1\"\u003e\n\u003ccolgroup\u003e\n\u003ccol width=\"65\"\u003e\n\u003ccol width=\"116\"\u003e\n\u003ccol width=\"116\"\u003e\n\u003ccol width=\"105\"\u003e\n\u003ccol width=\"88\"\u003e\n\u003ccol width=\"88\"\u003e\n\u003ccol width=\"88\"\u003e\n\u003ccol width=\"95\"\u003e\n\u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"1\" colspan=\"8\"\u003eIndentation Depth Reference (μm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"1\" colspan=\"8\"\u003eThe table below shows approximate indentation depth by load and hardness level - a useful reference when selecting the minimum load required to resolve a reading on harder materials, or the maximum load appropriate for thin coatings.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardness\u003c\/td\u003e\n\u003ctd\u003e0.3 kgf Motorized\u003c\/td\u003e\n\u003ctd\u003e0.8 kgf Motorized\u003c\/td\u003e\n\u003ctd\u003e1 kgf Motorized\u003c\/td\u003e\n\u003ctd\u003e1 kgf Manual\u003c\/td\u003e\n\u003ctd\u003e2 kgf Manual\u003c\/td\u003e\n\u003ctd\u003e5 kgf Manual\u003c\/td\u003e\n\u003ctd\u003e10 kgf Manual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e800 HV\u003c\/td\u003e\n\u003ctd\u003e4 μm\u003c\/td\u003e\n\u003ctd\u003e5 μm\u003c\/td\u003e\n\u003ctd\u003e7 μm\u003c\/td\u003e\n\u003ctd\u003e7 μm\u003c\/td\u003e\n\u003ctd\u003e10 μm\u003c\/td\u003e\n\u003ctd\u003e15 μm\u003c\/td\u003e\n\u003ctd\u003e22 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e600 HV\u003c\/td\u003e\n\u003ctd\u003e4 μm\u003c\/td\u003e\n\u003ctd\u003e5 μm\u003c\/td\u003e\n\u003ctd\u003e8 μm\u003c\/td\u003e\n\u003ctd\u003e8 μm\u003c\/td\u003e\n\u003ctd\u003e11 μm\u003c\/td\u003e\n\u003ctd\u003e18 μm\u003c\/td\u003e\n\u003ctd\u003e25 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e500 HV\u003c\/td\u003e\n\u003ctd\u003e5 μm\u003c\/td\u003e\n\u003ctd\u003e6 μm\u003c\/td\u003e\n\u003ctd\u003e9 μm\u003c\/td\u003e\n\u003ctd\u003e9 μm\u003c\/td\u003e\n\u003ctd\u003e12 μm\u003c\/td\u003e\n\u003ctd\u003e19 μm\u003c\/td\u003e\n\u003ctd\u003e27 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e300 HV\u003c\/td\u003e\n\u003ctd\u003e6 μm\u003c\/td\u003e\n\u003ctd\u003e8 μm\u003c\/td\u003e\n\u003ctd\u003e11 μm\u003c\/td\u003e\n\u003ctd\u003e11 μm\u003c\/td\u003e\n\u003ctd\u003e16 μm\u003c\/td\u003e\n\u003ctd\u003e25 μm\u003c\/td\u003e\n\u003ctd\u003e35 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100 HV\u003c\/td\u003e\n\u003ctd\u003e10 μm\u003c\/td\u003e\n\u003ctd\u003e13 μm\u003c\/td\u003e\n\u003ctd\u003e19 μm\u003c\/td\u003e\n\u003ctd\u003e19 μm\u003c\/td\u003e\n\u003ctd\u003e27 μm\u003c\/td\u003e\n\u003ctd\u003e43 μm\u003c\/td\u003e\n\u003ctd\u003e61 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003e\u003c\/h2\u003e\n\u003ch2\u003eItems Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli class=\"whitespace-normal break-words pl-2\"\u003e1× Phase2+ UCI Probe (model as selected)\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words pl-2\"\u003eProbe connection cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Phase2+","offers":[{"title":"PHT6000-221","offer_id":54059840405788,"sku":"PHT6000-221","price":9504.0,"currency_code":"USD","in_stock":true},{"title":"PHT6000-241","offer_id":54059840438556,"sku":"PHT6000-241","price":9504.0,"currency_code":"USD","in_stock":true},{"title":"PHT6000-251","offer_id":54059840471324,"sku":"PHT6000-251","price":9504.0,"currency_code":"USD","in_stock":true},{"title":"PHT6000-310","offer_id":54059840504092,"sku":"PHT6000-310","price":4312.8,"currency_code":"USD","in_stock":true},{"title":"PHT6000-320","offer_id":54059868127516,"sku":"PHT6000-320","price":4312.8,"currency_code":"USD","in_stock":true},{"title":"PHT6000-330","offer_id":54059840536860,"sku":"PHT6000-330","price":9502.56,"currency_code":"USD","in_stock":true},{"title":"PHT6000-350","offer_id":54059840569628,"sku":"PHT6000-350","price":4312.8,"currency_code":"USD","in_stock":true},{"title":"PHT6000-400","offer_id":54059840602396,"sku":"PHT6000-400","price":4312.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0890\/6991\/2348\/files\/Phase2_PHT6000-251_1kg_Motorized_Probe.png?v=1774642088","url":"https:\/\/precisionengineeringsupply.com\/products\/phase2-pht6000-accessory-probes","provider":"Precision Engineering Supply","version":"1.0","type":"link"}