Mag-Mate

The collection carries 12 Mag-Mate products from Industrial Magnetics, spanning heavy lifting magnets, manhole cover systems, magnetic clamping blocks, a magnetic pry bar, and a vertical lift adapter. Product families include the PowerLift, Flaig FX Universal, Flaig FXR Round Part, AdvantageLift, Creative Lift, DynamicLift, Vertical Lift Adapter, Manhole Cover Lift Dolly System, Manhole Powerarm, Septic Lid Lift System, Magnetic Clamping Blocks, and the Mag-Pry magnetic pry bar. These tools serve steel fabrication, industrial manufacturing, machine shops, construction, utility and infrastructure maintenance, and any operation requiring safe, efficient handling of heavy ferrous materials without power.

An on/off permanent lifting magnet uses an internal rotating rare-earth magnet element that can be aligned or misaligned with the magnetic circuit by turning a handle. In the ON position, the magnet's field is directed outward through the lifting face and into the ferrous workpiece, creating a secure holding force. In the OFF position, the internal element rotates 90°, canceling the external field so the magnet releases the load. No electricity is required at any point and the permanent rare-earth core provides the force, and the mechanical handle simply routes that force on or off. This makes these magnets inherently safe during power failures and eliminating the need for electrical power connections during material handling operations.

Both are permanent rare-earth on/off lifting magnets, but they are optimized for different workpiece geometries. The Flaig FX Series is a universal magnet with a flat lifting face and well-spaced magnetic poles that handle both flat steel plates and curved or round materials, spanning working loads from 900 lb (FX0900) to 6,600 lb (FX6600). The Flaig FXR Series is purpose-built specifically for cylindrical and curved steel surfaces such as shafts, billets, bars, and round stock where the contact geometry of a flat-face magnet would reduce holding capacity. The FXR's pole geometry is shaped to maximize contact area on round surfaces, producing reliable grip strength on parts that a flat-face magnet would underperform on. Choosing between them depends primarily on whether your dominant workpiece geometry is flat plate or cylindrical stock.

The PowerLift series (PNL1600 and PNL2500) are compact, industrial-grade rare-earth on/off lifting magnets designed for steel plate rigging, fabrication, and material handling. The PNL1600 supports a 1,600 lb working load limit on flat material (800 lb on round), while the PNL2500 supports 2,500 lb flat (1,250 lb round). Both feature a locking on/off handle that prevents accidental disengagement, an internal release mechanism that protects the workpiece surface during release, and a 3:1 design factor certified to ASME B30.20 / BTH-1. Heat tolerance extends to 180°F, making them suitable for post-weld or elevated-temperature industrial environments. Each unit ships with a swivel lifting bail, a safety and load-test certificate, and a user manual.

Manhole covers are heavy cast iron or steel lids typically 100–400 lbs that utility and infrastructure crews historically pry open with iron bars, an approach that exposes workers to serious musculoskeletal injury risk and requires multiple people. The Mag-Mate Manhole Cover Lift Dolly System replaces that method entirely: a permanent rare-earth on/off magnet attaches to the lid magnetically, and a wheeled dolly with a 64" adjustable telescoping handle (collapsing to 41" for transport) allows a single person to lift, tilt, and wheel the lid clear of the opening. Handle angle settings at 90°, 105°, and 120° accommodate different ergonomic preferences and job site terrain. Multiple variants are available with 6", 10", or 12" wheels for paved surfaces, uneven terrain, or tight access. The system is ASME B30.20 compliant and ships with test certification.

The Manhole Powerarm (MCLPAM1000 / MCLPAE2000) is a vehicle-mounted magnetic manhole cover lifting system designed for crews that service multiple covers in rapid succession, such as municipal utility maintenance teams, telecom cable access crews, and sewer inspection operations. Rather than carrying a portable dolly to each location, the Powerarm mounts to a service vehicle and uses mechanical advantage combined with a magnetic lift to raise covers with minimal physical effort from the operator. This dramatically reduces the cumulative strain of opening and closing dozens of covers per shift. The two models differ in their rated capacity, with the MCLPAE2000 handling heavier covers up to the 2,000 lb range.

The MCLLEGM Septic Lid Lift System is specifically designed for lifting and maneuvering septic tank lids typically cast concrete covers weighing up to 400 lbs. Unlike cast iron manhole covers, concrete septic lids often sit in soft residential or agricultural ground where wheeled dollies may sink or be difficult to maneuver. The MCLLEGM provides a stable, ergonomic magnetic lift solution tailored to this environment, allowing a single service technician to remove and replace heavy concrete lids without a second person or mechanical equipment. It is the practical safety solution for septic service companies seeking to reduce on-site injury risk and increase single-technician job efficiency.

The Mag-Mate Magnetic Clamping Blocks (MBX07PK2 and other models) are on/off rare-earth magnetic V-blocks engineered to securely clamp flat, round, square, and angled steel workpieces for welding, fixturing, and fabrication setup. Unlike mechanical clamps that require tightening and repositioning, magnetic clamping blocks activate and release instantly via on/off handle, allowing rapid workpiece positioning without marring the surface. The V-block geometry provides multi-surface contact, making them effective on cylindrical bar stock and irregular profiles as well as flat plate. They are a high-value productivity tool in welding fabrication shops where fast, accurate fixturing directly reduces setup time and improves weld quality.

The Mag-Pry PB1000R is an on/off magnetic pry bar that combines the mechanical leverage of a traditional pry bar with permanent rare-earth magnetic attachment. Rather than wedging a standard pry bar under a part and relying on friction or a physical catch, the Mag-Pry attaches magnetically to the steel surface, allowing controlled alignment, leveling, and positioning of steel plates and structural members during fabrication and installation. The on/off mechanism allows the tool to release cleanly without manual prying off the surface. It is particularly useful in structural steel erection, plate fabrication, and heavy assembly work where precise alignment of large ferrous components is required and conventional pry bars risk slipping or scratching finished surfaces.

All Mag-Mate orders ship free to the continental USA, backed by a best-price guarantee. A 30-day return policy and Affirm financing at checkout are available across the full Mag-Mate lineup. Government agencies and contractors can submit an RFQ through the dedicated Government RFQ page (DUNS: 13-715-2209, CAGE: 15F67). Selecting the right lifting magnet, particularly matching working load limit, surface geometry, and safety certification requirements to a specific application and requires careful consideration. Gustavo personally reviews every order and welcomes buyers to call or text 617-398-7852 before purchasing, Monday through Friday, 8am–5pm EST, to ensure the right product for the job.